Kann Supply Waterworks provides their customers access to our Industries most reputable manufacturers. Combined with our Parent company, Emco Corporation, we can provide the right solutions for todayâs ever-changing sustainable underground civil infrastructure needs.
Our Manufacturing partners are carefully selected on 3 pillars of excellence. Reliability, quality and consistency of product and service.
KANN SUPPLY PRODUCT LISTING
- Watermain Pipe and Fittings >
- PVC Trenchless PVC Watermain>
- PVC Sewer-Storm Pipe & Fittings>
- ADS Canada HDPE/Nyoplast/Stormtech>
- Fire Hydrants Municipal and Industrial>
- Pipe Casing Spacers>
- Gate Valves Municipal and Industrial>
- Pipe Couplings, Clamps and Saddles>
- Cathodic Protection>
- Tracer Wire>
- Service Line Tubing, Fittings, Service Boxes>
- Pipe Restraints>
- Manhole & Catch-basin Frames & Covers/Grates>
- Modular Mechanical Pipe Seals>
- Urecon Pre-Insulated Pipe>
- Proform Manholes & Catch Basins>
- Manhole Pipe Connectors>
- Sheet Insulation>
- Geotextiles Woven & Non-Woven>
- Permanent Cold Mix Asphalt>
- Cement Products/Manhole Repair>
- Chlorinating & De-Chlorinating>
Kann Supply takes no exception to the critical asset of a leak free
water distribution system. From the design, supply and install and
final pressure test, choosing the right material is the first step in a
process that ensures installation has the best chance for success.
Ductile Iron Watermain Fittings
Ductile Iron C110 Push-on and flanged fittings offer a PVC watermain
Distribution system a robust fitting that can withstand potential
damage prior to being installed underground.
Ready-made and custom-made products.
Terminal City specs
Fusible PVC pipe has grown to be a trenchless method of choice
for waterdistribution systems throughout Canada, the United
States and Mexico.Traditional transitions are no longer required
allowing a PVC system to retain its PVC signature throughout the
entire system. Operators know,the less transitions underground,
the less potential leak points in the future.
For short trenchless applications where mobilizing fusion equipment
may seem cost prohibitive, the solution is PVC Terrabrute. This pipe
incorporates a built-in mechanical restraint allowing basic tooling
and low cost install.
PVC Drainage pipe is offered traditionally as Smooth Wall
SDR35. Insome municipalities, profile pipe such as PVC
Ultrarib is accepted for Storm drainage. Please see below for
Ultrarib PVC Fittings
ADS Canada manufactures a wide range of drainage solutions.
From 4âweeping tile to 60â Diameter dual wall Sanitite pipe,
Nyoplast Drainage Structures and the 30,000 Stormtech
systems inservice around the world,ADS is a leader in sustainable
land development and innovative underground infrastructure
N-12 Dual Wall/Triple Wall (CSA)
Pipe Joints and Gaskets
Product Submittal Packages
Manhole Connection Details
Pipe Installation Details
Technical Notes Installation
Nyoplast Drainage Structures
HD Drain Basins
For in-depth additional information including an online design tool.
Stormtech Green Infrastructure
Stormtech Turf Applications
Kann Supply is a proud Distributor of American AVK Valves
and Fire Hydrants. AVK Fire Hydrants and Valves are in service
with utilities across North America, South America, Central
America andthe Caribbean. Long life service and a 10 year warranty
are part of a sustainable Water Distribution System.We also
carry a number of Mueller Canada Valve Fire Hydrants to cover
We also have access to North Americaâs leading brands of
Monitors and Nozzles for Industrial applications.
Please contact Kann Supply for more information.
AVK Fire Hydrant Overview
AVK Series 2780 Nostalgic Fire Hydrant
AVK Nostalgic 2780 Hydrant Instruction Manual Pre-2016>
AVK 2780 Parts list Pre-2016
AVK Nostalgic 2780 Hydrant Parts List Pre-2016
AVK 2780 Parts List Post-2016
AVK Nostalgic 2780 Hydrant Parts List
AVK 2700 Parts List Pre-2016
AVK Modern 2700 Parts List Pre-2016
AVK 2700 Parts List Post-2016
AVK Modern 2700 Parts List
AVK Series 2700 Modern Industrial Monitor Fire Hydrant
AVK Fire Hydrant Warranty
Certificate of Conformance
Mueller Fire Hydrant
Mueller Fire Hydrant Extension Installation
American AVK Gate Valves are the only valve manufacturer that
offer 304 stainless steel stem vs bronze operating stem. Long life
service is a critical component of a sustainable Water Distribution
System and our gate valves fit in where it matters most.
General Field Maintenance & Instruction Manual
Exploded Parts Drawing
AVK Push-On Gate Valves Series 45 (4â-16â)
AVK Series 34 Post Indicator Operations & Maintenance Manual
AVK Series 34 Post Indicator Parts List
AVK Bevel Gear Operator
AVK Spur Gear Operator
Type B Valve Box
Mechanical When it Comes to joining pipes of similar or different
outside diameters, the joining method options are so diverse, it almost
becomes difficult to settle on the right solution. With Kann Supplies
20+ year experience with these methods, we are confident in helping
choose what is best for your project. For most applications, the below
couplings and saddles will get the job done for any pipe connection.
For the numerous piping solution not listed below, Kann Supply has
access to every pipe joining manufacturer in the Industry today.
Hymax Selection Guide
Hymax 2 Brochure
Hymax 2 Coupling (1.5â-12â)
Hymax 2 Coupling (1.5â-12â) Installation Instructions
Hymax Large Diameter (14â-60â) Brochure
Hymax Large Diameter (14â-60â) Product Specifications
Hymax Large Diameter (14â-60â) Installation
Hymax Reducing Couplings Small & Large Diameter
Hymax 2 Reducing Couplings (1.5â-12â)
Hymax 2 Reducing Couplings (1.5â-12â) Installation
Hymax Large Diameter Reducing Couplings (1.5â-60â)
Hymax Large Diameter Reducing Couplings (1.5â-60â) Installation
Hymax 2 Flange Coupling Adapter (1.5â-12â)
Hymax 2 Flange Coupling Adapter (1.5â-12â) Installation
Hymax Flange Coupling Adapter (1.5â-60â)
Hymax Flange Coupling Adapter (1.5â-60â) Installation
Hymax Grip Overview
Hymax Grip Coupling Restraining Coupling (1.5â-12â)
Hymax Grip Coupling Restraining Coupling (1.5â-12â) Installation
Hymax Grip Restraining Large Diameter (14â-16â)
Hymax Grip Reducing Restraining Coupling (1.5â-12â)
Hymax Grip Restraining Flange Adapter (1.5â-12â)
Hymax Grip Restraining Flange Adapter (1.5â-12â) Installation
Hymax Grip Restraining Cap (1.5â-12â)
Hymax Grip Restraining Cap (1.5â-12â) Installation
Hymax EZ Max Repair Clamps 1.5â-24â) Installation
Top Bolt 421 Coupling (2â-12â, 16â&24â)
Top Bolt 421 Coupling (2â-12â, 16â&24â) Specification
Top Bolt 421 Coupling (2â-12â, 16â&24â) Installation
Sacrificial Anodes are in most municipalities, an integral part of the
long-term service of water distribution systems buried metallic Valves,
Fire Hydrants and Iron Fittings. The way we counteract galvanic
corrosion is to add a third metal into the circuit. The third metal has
to give up its ions easier than the other two metals. This piece of
metal the sacrificial anode, in our application, is zinc or magnesium.
Zinc Ground Clamps
Brass Ground Clamps
Info Sheet on Weld Metal
Flint Gun Ignitor
Petro Primer Paste
Tracer wire is an inexpensive, insurance policy to ensure your utility
can be located without incurring additional costs during a repair of
the distributions system. Just as important are the connectors and
test stations. That is why Kann Supply is a proud distributor of the
Copperhead line of Tracer Wire System products.
Open-Cut Tracer Wire
Pipe Bursting Tracer Wire
Tracer Wire Connectors
Pipe Bursting Connectors
Service Material that run to the residence or building can be
specified in a number of various materials including Copper Tubing,
Copper-Tube Size HDPE, Fusible HDPE, Cross link HDPE and
Q-Line. Kann Supply carries many options for your service
Polyethylene CTS CSA Tubing
MUNI 3608 SPEC SHEET 2013
Type K Soft Copper
Kann Supply also offers pre-made Goose Necks for 1-1/2â & 2â Services and blow-off adapters.
Blue 904 Pex Municipal
No-Lead Service Line Brass Curbs, Mains and Fittings
WATERWORKS BRASS MANUFACTURER
Installation Requirements Curbs and Corps
Mainstops CTS (CC x CB Compression)
Mainstop (CC x Q-Line Compression)
CTS Curbstop without Drain
Q-Line Curbstop without Drain
CTS Curbstop with Drain
Q-Line Curbstop with Drain
CTS Compression Couplings with stop
CTS Compression Full Bore Less Stop Couplings
Q-Line Coupling with Stop
Q-Line x Comp Coupling
CTS Compression x Male MIP
Q-Line x Male MIP
CTS Compression x Female FIP
Q-Line x Female FIP
CTS Compression Teeâs
CTS Compression 90 Bends
CTS Compression Wyeâs
Multi-Branch Service Wye
Stainless Steel Pipe Inserts for CTS Tubing
86 SERIES INSERT
HDPE DR11 Compression Fittings
Compression Mainstop (CC x PVC IPS OD F/HDPE)
Compression Curbstop Less Drain PVC IPS OD F/HDPE
Compression Curbstop With Drain PVC IPS OD F/HDPE
Compression Coupling Less Stop PVC OD F/HDPE
Compression Male Adaptor (PVC OD F/HDPE x MIP)
Compression Female Adaptor (PVC OD F/HDPE x FIP)
Stainless Steel Pipe Inserts for HDPE
89 SERIES INSERT
Country Style CSB1
Country Style CSB2
Mechanical Pipe restraints are used to protect valves, fittings and
Fire Hydrants from unwanted movement in the ground. Traditional
poured-in-place concrete thrust blocks are sometimes specified as a
stand-alone solution. So are pipe restraints. And in some cases, both
are specified as two layers of protection. In high density population
areas, this might be a favorable âBelt and Suspendersâ approach.
1300C Pipe Restraint (4â-42â)
Installation of Restraint and Back-Up Ring
900 Series Flange Adapter
Installation of Flange Adapter
Kann Supply has you covered in all specified and custom castings.
This section includes the commonly specified Manhole and Catch
Basin Covers/Grates for the Edmonton and area market. We do of
course have access to any and all frames and covers/grates in the
Manhole Frames & Covers Trojan Industries
COMPLETE MANHOLE FRAME AND COVERS SECTION
Catch Basin Frames and Grates Trojan Industries
COMPLETE CATCH BASIN FRAMES AND GRATES SECTION
Certificate of Conformance
Material Compliance Letter
Manhole and Catch Basin Frames & Covers/Grates Westview Sales
Modular seals are a popular method of sealing the annular space
between the wall sleeve, or concrete cored hole and the pipe
penetrating the structure. They for a hydrostric seal up to 40 psig &
up to 90.28 feet of head pressure. No special tools are required.
Contact Kann Supply to assist in your modular seal needs.
Innerlynx Modular Seals
Water and Sewer Mains
The use of Urecon shallow buried pre-insulated pipe can result in a substantial
reduction of excavation costs and may permit earlier project completion. U.I.P.Â®
pre-insulated pipe can be installed in the active frost zone (with low wattage electric
tracing if necessary) and resist freezing. The use of Urecon pre-insulated pipe has
permitted hundreds of northern communities to obtain year round piped potable
water, resulting inmajor social and health benefits. Savings are greatest when rock
is encountered as it is far less expensive to pre-insulate and shallow bury water
and sewer pipes than to blast and deep bury in rocky conditions.
In sandy or poor soil conditions, experience has shown that a considerable width to
depth ratio is often required for excavation to permit conventional burial of pipelines
below the frost zone. A Urecon pre-insulated pipe system, shallow buried
(with low wattage electric tracing if necessary) could result in the excavation of one
tenth the earth volume otherwise required. Substantial cost savings are thus
realized and the danger to workers in deep trench conditions is avoided.
A 3 m (9.8 ft) deep trench in type 4 soil, requires an excavated width at grade of
18 m (59 ft) to provide worker safety.
A 1 to 3 wall slope is required when excavating in type 4 soil conditions. Type 4
soil is defined as: soil that can be excavated with no difficulty using a hydraulic
backhoe. The material will flow very easily and must be supported and contained
to be excavated to any significant depth.
With its high moisture content, type 4 soil is very sensitive to vibration and other
disturbances which cause the material to flow. Typical type 4 material includes
muskeg or other organic deposits with high moisture content, quicksand, silty clays
with high moisture content, and leta clays. Leta clays are very sensitive to
disturbance of any kind.
(Source: âTrenching Safetyâ, Construction Safety Association of Ontario).
600 mm (24 in) bury. Live H-20 load transferred to the insulation at 600 mm
(24 in) depth of bury is 38 kPa (5.51 lbs/in2). Our system is rated
414 kPa (60 lbs/in2).
Live Loads on Buried Pre-Insulated Pipe
between tires and 1,676 mm (66 in) center to center spacing between fore and
aft tires, under a rigid pavement 300 mm (12 in) thick plus impact.
Manhole Frost Cover Submittal
2019 has brought Kann Supply and Emco Corporation another
milestone in our ability to be your supplier of choice. Kann Supply and
affiliated Waterworks Distributors now have the exclusive distributorship
of Proformâs well established quality precast Manhole and Catch Basin
products. One stop-shopping and total Project Management are
Kann Supplyâs aim to develop meaningful relationships with our Customers.
PCP Concrete Drawing CatalogueÂ
Manhole and Catch-Basin inlets and outlets can be cored-in with
mechanical pipe seals or grouted-in with grouting rings. Kann Supply
carries a variety of options for connecting to your Manholes and
After the 1995 Kobe earthquake in Japan, an initial inspection of 52
manholes in the municipality â half of them with conventional
pipe-to-manhole connections and half with Trelleborgâs Kor-N-Seal
flexible connectors â found that the majority of the conventional
connections had suffered varying degrees of failure.â¯However, of those
featuring Kor-N-Seal connectors, only one was found to have a small leak.
Sizing Chart 15.00âOD – 51.00âOD
206 SIZING CHART-Standard Manhole Sizes
Letter of Compliance
Letter of Compliance Kor-N-Seal
Beaver Plastics HS40 is our preferred alternate to HI-40 and equal
products. Our carbon footprint is minimized by supporting Beaver
Plasticâs Manufacturing facility located 13km East of Kann Supply.
Beaver Plastics has made great strides meeting spec on projects in
our vicinity. In addition, custom cut sheets of any dimension specified
are rapidly manufactured in just a handful of days.
HS-40 Insulation Epcor Approval
Kann Supply stocks standard Woven and non-woven geotextiles and
also has access to Geogrid, silt fence, hubs & lathe and other erosion
and sediment control materials.
Cold Joints Tech Brief
Utility Cut before and After Photoâs
Kann Supply offers a ready-mix cement solution for each specific Water & Sewer need.
Blue-Line Rapid Repair Grout.
Sets in 20 minutes and is best suited for structural repairs.
Fast Patch Cement.
Sets in 7 minutes and is best suited for light infiltration or small structural repair.
Sets in 5 minutes and is best suited for water infiltration
Aqua Plug & Meadow Plug Cement
Foam injection technology. Full leak stop in structural concrete infiltration.
Complete Guide to Water Control
Low Pressure Injection (SealGuard II)
Low Pressure Injection (SealGuard II)
Low Pressure Injection (SealGuard II)
SealGuard IIÂ is highly reactive dual component hydrophobic polyurethane
with a 1 to 3 second reaction time. It is designed to stop rapid (>50 gpm)
water flows into concrete or other underground structures. SealGuard II
is hydrophobic, so it will not shrink. Our patented check-valve in the
static mixer allows a partially used tube set to be re-used.
- Applications: High flow leaks which can be in
excess of 50 gallons per minute in concrete,
brick or stone structures.
- Packaging: Dual 600 ml 1:1 Caulk Tubes
Transport: USDOT Unregulated Class 55
- Storage: Product is moisture sensitive and
should be stored at 60-70â°. Product should
not be exposed to the atmosphere until application.
Tools, Accessories, Materials and how to use them
High Pressure Injection (HyperFlex)
HyperFlexÂ is a highly versatile single component, pre-catalyzed
hydrophobicÂ polyurethane grout. Because it is pre-catalyzed there
is none of the guesswork and expense of field mixing catalyst; simply
adjust the temperature of the HyperFlex container to vary your
reaction time. Since it is a hydrophobic material shrinking will not be an
issue like it can be with hydrophilic materials. HyperFlex is
NSF 61-2007 approved for contact with potable water.
- Low or high pressure crack injection
- Barrel joint repair
- Annulus grouting
- Underwater leak sealing
HyperFlex is a slower reacting product than our SealGuard II and works
well in weeping or low flow leaks. The slower reaction and lower viscosity
allows the material to travel further before reaction, allowing for better
penetration and coverage within the leaking substrate. Once cured,
HyperFlex will form a permanent, non-shrinking seal against further leaks.
- Packaging: 300 ml Caulk Tube
- Transport: USDOT Unregulated Class 55
- Storage: Product is moisture sensitive and should be stored at
60-70â°. Product should not be exposed to the atmosphere
until application. Avoid contact with moisture.
X-Seal Leak Sealant
X-SealÂ is a hydrophobicÂ polyurethane sealantÂ and adhesive. It forms
a tenacious bond between porous surfaces such as concrete, brick and
wood. X-Seal’s primary use is as an adhesive and sealant in the joints
between pre-cast concrete sections and riser rings in manhole applications.
X-Seal is also an excellent general construction adhesive and sealant
and can be used to join virtually any porous surface with a
hermetic,Â watertight sealing.
- The sealing and adhesion of pre-cast concrete sections
- Sealing rubber composite and metal manhole riser rings
and manhole covers
X-Seal is non-shrinking and provides at least a 15 minute working time. It reacts
with water and has a variable reaction time, depending on the temperature of
the X-Seal, the substrate and the air. Once cured it will provide a permanent seal
that will pass a vacuum test. X-Seal is NSF 61 approved for contact with potable water.
- Packaging: 300 ml Caulk Tube or 8 or 5 Gallon Pail
- Transport: USDOT Unregulated Class 55
- Storage: Product is moisture sensitive and should be stored
at 60-70â°. Product should not be exposed to the atmosphere
until application. Avoid contact with moisture.
Disinfecting Watermain (Chlorination)
Sodium Hypochlorite 7-16 CTI SDS September 05, 2019 (1)
Measurement Technologies Chlorinating Instructions
The H2O Neutralizer was originally created to provide a means of injecting
dissolved ascorbic acid into chlorinated water as a means of neutralizing residual
chlorine.Â This need came to light when a water quality official in Skagit County,
Washington was made aware of a fish kill of 25,000 salmon fry, recently planted
by students of a local elementary school as a class project, resulting from an
accidental release of super chlorinated water into a local stream.
Founded in 2000 to produce high quality field chlorination and dechlorination
equipment for the water utility industry, Measurement Technologies came into
being to manufacture the H2O NeutralizerÂ®; the first lateral-by-pass venturi-induced
chemical injector for chlorination and dechlorination in water pipeline construction
While the device was originally designed for use with ascorbic acid Measurement
Technologies now offers Calcium Thiosulfate Solution premixed and ready to use
as an alternative to more expensive and highly acidic ascorbic acid.
Full Line Catalog
Dechlorinating Calcium Thiosulphate Solution
H20 Neutralizer Model 3M
H20 Neutralizer 5M
Product Data Sheets
H20 Neutralizer Performance Specifications
Chlorinating & Dechlorinating Calculator
How to use CDC Calculator v.3
Chlorine Water Testing